Showing posts with label SharePoint 2010. Show all posts
Showing posts with label SharePoint 2010. Show all posts

Thursday, September 12, 2019

September 2019 CU for SharePoint 2010

September 2019 CU for SharePoint 2010



This CU includes all SharePoint 2010 fixes (including all SharePoint 2010 security fixes) released since SP2. The CU does not include SP2.
The KB articles for September 2019 CU should be available at the following locations in a couple of hours:
  • KB 4475605 – SharePoint Foundation 2010 September 2019 CU
  • KB 4475603 – SharePoint Server 2010 September 2019 CU
  • KB 4475600 – Project Server 2010 September 2019 CU
The Full Server Packages for September 2019 CU are already available through the following links:


I hope the above information will help you to resolve the issue, in case of any queries/questions regarding the above mentioned information then please let me know. I would be more than happy to help you as well as resolves your issues, Thank you.

Monday, August 7, 2017

The List View Threshold Exceeds the Limit of Current Threshold limit in SharePoint

The List View Threshold Exceeds the Limit of Current Threshold limit in SharePoint:


 Issue: The List View Threshold Exceeds the Limit of Current Threshold limit.


Cause: The No of lists created in the site will be more than the Default Recommended value (5000) By Microsoft.


It’s not recommended to increase the List View Threshold above 5000 as recommended by MS. There may be some performance issues with the site occurs.


Workaround: Please find the below as Work Around to resolve the issue.
split the items into multiple lists so that no list exceeds 5,000 items. Because you'll be unable to view the list items beyond the limit of 5,000 items, you must configure metadata-based navigation so that you can access all the list's contents.


To enable metadata-based navigation, follow the "Enable Metadata Navigation and Filtering" and "Configure Metadata Navigation" sections of the following Microsoft website: 






After metadata navigation is enabled, the list's contents will become available. We recommended that you then reduce the list's contents to less than 5,000 items.


Note: This is only for SharePoint 2010 and SharePoint 2013.In SharePoint 2016 The Limit is increased.


I hope the above information will help you to resolve the issue, in case of any queries/questions regarding the above mentioned information then please let me know. I would be more than happy to help you as well as resolves your issues, Thank you.

Tuesday, August 4, 2015

Difference between create a new farm and join an existing farm



Difference between create a new farm and join an existing farm

I am writing this topic because, many of the administrators who entered into the SharePoint recently will get this query, what makes difference between them? We see this option after the installation of SharePoint and while running the Products and Technologies wizard.

create a new farm: This option is used to create a new SharePoint installation .(This can be a standalone installation having all the roles (Web front end(WFE), Application server and database server on the same machine). This is where the new configuration DB will be created in SQL

join an existing farm: This option is used to add a new role to an existing SharePoint installation(In farm scenario, we can add an application server or WFE by joining the machine to an existing farm). This is where the server will be connected to already created configuration DB.


 


I hope the above information will help you to resolve the issue, in case of any queries/questions regarding the above mentioned information then please let me know. I would be more than happy to help you as well as resolves your issues, Thank you.

Thursday, July 23, 2015

SharePoint 2010 support will end on October 2015



SharePoint 2010 support will end on October 2015

In case if  your still have SharePoint environments running on SharePoint 2010:
Mainstream support for SharePoint 2010 will end on October 13th, 2015:
https://support.microsoft.com/en-us/lifecycle?p1=14944
 
After this date only security fixes will be provided for SharePoint 2010. That means if you are running into an issue after October 13th which is caused by a problem in SharePoint 2010 and which has not already been addressed before you will no longer be able to request a hot fix.
Not the best situation if you are using SharePoint 2010 as a business critical application.
 


I hope the above information will help you to resolve the issue, in case of any queries/questions regarding the above mentioned information then please let me know. I would be more than happy to help you as well as resolves your issues, Thank you.

Friday, May 29, 2015

Upgrade from a SharePoint Server 2010 Standard CAL to an Enterprise CAL

Upgrade from a SharePoint Server 2010 Standard CAL to an Enterprise CAL

This article provides information and procedures on how to upgrade from a Microsoft SharePoint Server 2010 Standard client access license (CAL) to an Enterprise CAL

Enable Enterprise features on existing sites

To convert the license type to the Enterprise CAL, you enable the Enterprise features on the SharePoint Central Administration Web site. Any new sites that you create will automatically have these features. However, existing sites do not receive the Enterprise feature set until you perform the steps to enable the features on existing sites. You have to perform these procedures only one time to update all sites in the server farm.
This procedure uses a SharePoint 2010 Timer service and may take a long time to complete, depending on the number of sites in the server farm.

To enable Enterprise features for the server farm 

1.    Verify that you have the following administrative credentials:
o    To enable enterprise features, you must be a member of the Farm Administrators group on the computer that is running Central Administration.
2.    On the Central Administration Web site, click Upgrade and Migration.
3.    In the Upgrade and Patch Management section, click Enable Enterprise Features.
4.    Enter the product key, and then click OK.
After you have enabled the features for the farm, you can enable the features on existing sites in the farm.

To enable Enterprise features on existing sites by using Central Administration 

1.    Verify that you have the following administrative credentials:
o    To enable enterprise features on existing sites, you must be a member of the Farm Administrators group on the computer that is running Central Administration.
2.    On the Central Administration Web site, click Upgrade and Migration.
3.    In the Upgrade and Patch Management section, click Enable Features on Existing Sites.
4.    On the Enable Features on Existing Sites page, select the Enable all sites in this installation to use the following set of features check box, and then click OK.

To enable Enterprise features on existing sites by using Windows Power Shell
 
1.    Verify that you meet the following minimum requirements: See Add-SPShellAdmin.
2.    On the Start menu, click All Programs.
3.    Click Microsoft SharePoint 2010 Products.
4.    Click SharePoint 2010 Management Shell.
5.    At the Windows PowerShell command prompt, type the following command:

Enable-SPFeature [-Identity] <FeatureID> [-URL] <site URL>
Where:
o    <Identity> specifies the name of the feature or GUID to install.
o    <URL> specifies the URL of the Web application, site collection, or Web site for which the feature is being activated.

Verification:

Use the following procedure to verify that the enterprise features have been enabled on existing sites.
To verify that enterprise features are enabled on existing sites
1.    Verify that you have the following administrative credentials:
o    To verify that enterprise features are enabled on existing sites, you must be a member of the Farm Administrators SharePoint group on the computer that is running Central Administration.
2.    On the site collection Web site, on the Site Actions menu, click Site Settings.
3.    On the Site Settings page, in the Site Administration section, click Site features.

In the Status column for SharePoint Server Enterprise Site features, ensure that Active appears.

I hope the above information will help you to resolve the issue, in case of any queries/questions regarding the above mentioned information then please let me know. I would be more than happy to help you as well as resolves your issues, Thank you.

Monday, April 20, 2015

Regional settings in SharePoint


Regional settings in SharePoint

the regional settings are determined by the regional settings of the computer that is running the Microsoft Dynamics NAV Windows client. SharePoint Server 2010 has the following regional Settings.






To change the regional settings for a SharePoint site
  1. Open the site on which you want to change the regional settings.
  2. On the Site Actions menu, choose Site Settings.
  3. On the Site Settings page, under Site Administration, choose Regional settings.
  4. On the Regional Settings page, select the settings that you want for this site, and then choose the OK button




 


I hope the above information will help you to resolve the issue, in case of any queries/questions regarding the above mentioned information then please let me know. I would be more than happy to help you as well as resolves your issues, Thank you.

Monday, April 6, 2015

The Web server at "Web site collection URL" does not appear to have Microsoft SharePoint Foundation installed



The Web server at "Web site collection URL" does not appear to have Microsoft SharePoint Foundation installed

Issue: The Web server at "Web site collection URL" does not appear to have Microsoft SharePoint Foundation installed

Cause: The Web server at "Web site collection URL" does not appear to have Microsoft SharePoint Foundation installed

Solution: Please follow the steps below to resolve this problem, enable the client integration. To do this, follow these steps:

1.   Start SharePoint 2010 Central Administration, and then click Security.
2.   Click Specify authentication providers.
3.   If the Web application in the Web Application list is not the same application that you want to open in SharePoint Designer 2010, click Web Application on the Change Web Application list.
4.   On the Select Web Application page, click the name of the Web application that you want to open.
5.   Under Zone, Click Default to open the Edit Authentication page.
6.   Under Enable Client Integration, click Yes, and then click Save.

  
I hope the above information will help you to resolve the issue, in case of any queries/questions regarding the above mentioned information then please let me know. I would be more than happy to help you as well as resolves your issues, Thank you.

ShareThis

X